Mission

 
 
 
 

To be leader in providing Hydraulic Solution by understanding the needs of the customer and providing quality product / service at the right time and at right price

 

37 Degree Flare Fittings, Flare Fittings, 37º Flare Fittings, Pipe Fittings, Stainless Steel Pipe Fittings, Socket Weld Fittings, Hydraulic Flanges, Hydraulic SAE Flanges, Split Flanges, SAE Flanges, Pipe Clamps, DIN 3015 Pipe Clamps, Valve, Ball Valve, Needle Valve, Flow Control Valve, Check Valve, Non Return Valve, Hose End Fittings, Quick Release Coupling, Superhydrotech  Engineers Pvt. Ltd.

37 Degree Flare Fittings

37 Degree Flare Fittings
   

   37 Degree Flare Fittings

                                                                                               

     
 
S. H. 37º Degree Flare Fittings is manufactured as per SAE J514 / ISO 8434 - 2 for ease of interchangeability. It consists of three parts Body, Sleeve, and Nut and is available for different pressure rating ranging from 70Bar to 690Bar .
 
 
 Type
 37º Degree Flare Fittings
 Standard  SAE J514 / ISO 8434 - 2
 Series
 3mm to 38mm 1/8”OD to 2”OD
 Pressure
 Ranging from 70Bar to 690Bar depending on type and size
 Material
 Steel, Stainless Steel, Brass (From extruded bar or forging)
 Surface Treatment  Steel – Zinc Coated (A3C) or Phospatised, Trivalent Stainless Steel – Electro polished, Nut Silver  Plated to avoid galling Brass – Natural
 
  Theory Of Operation  
  S. H. 37º Degree Flare Fittings are composed of three parts :-   1. Body    2. Sleeve     3. Nut  
 
 
Tightening of the nut clamps the tube flare between the body nose (seat) producing a leak tight connection. This clamping on the 37º Degree Flare Fittings taper provides a measure of elasticity to the joint helping it to resist loosening under vibration. The clamping force results in a small radical load that tends to deform the fitting nose radially. The resistance of the nose to elastic deformation provides a constant preload (similar to a lock washer) keeping it tight. The clamping force provided by the nut resists the opposing force of the fluid under pressure. The joint remains leak tight as long as the clamping force is higher than the opposing pressure load. Properly assembled 37º Degree Flare Fittings with appropriate tube will seal consistently under pressure until tube bursts.
 
 
 Before Tightening  After Tightening
   
   
 
  Recommendation  
  Seamless and welded tube fully annealed is recommended for ease of flaring and bending .  
     
 
Corporate Office : Gala No. 108 Shillay Ind. Estate 1st floor, Plot H8 Udyag Nagar S.V. Road Goregaon (W) Mumbai-62 Tel : +91-22-2876 86 93  Fax :+91-22-2877 16 57 
Email : superhydrotech@gmail.com