Mission

 
 
 
 

To be leader in providing Hydraulic Solution by understanding the needs of the customer and providing quality product / service at the right time and at right price

 

Single Ferrule Fittings, High Pressure Steel Fittings, Flare less Bite Type Fittings, Ferrule Fittitngs, Twin Ferrule Fittings, Double Ferrule Fittitngs, 37 Degree Flare Fittings, Flare Fittings, Pipe Fittings, Stainless Steel Pipe Fittings, Socket Weld Fittings, Hydraulic Flanges, Hydraulic SAE Flanges, Split Flanges, SAE Flanges, Pipe Clamps, DIN 3015 Pipe Clamps, Valve, Ball Valve, Needle Valve, Flow Control Valve, Check Valve, Non Return Valve, Hose End Fittings, Quick Release Coupling, Superhydrotech  Engineers Pvt. Ltd.

Single Ferrule Fittings

Single Ferrule Fittings
   

   Single Ferrule Fittings

                                                                                               

 
 
“S. H.” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. Single Ferrule fittings are available for different pressure rating from 100Bar to 630Bar .
 
 
 Type
 Flare less Bite Type (Single Ferrule Fittings) Weld Nipple Type
 Standard  DIN 2353 / ISO 8434 - 1
 Series
 LL (Very Light) L (Light) S (Heavy)
 Size
 4mm to 42mm 1/8”OD to 2”OD 1/8”NB to 2”NB
 Pressure
 Ranging from 100Bar to 630Bar depending on type and size
 Material  Steel, Stainless Steel, Brass (From extruded bar or forging)
 Surface Treatment  Steel – Zinc Coated (A3C) or Phospatised, Trivalent Stainless Steel –  Electro polished, Nut  Silver Plated to avoid galling Brass – Natural
 
       Principle:
 
 
“S. H.” Single Ferrule Fittings is a three piece design consisting of a body portion, a coupling nut and a ferrule. During the assembly the nut is progressively tightened causing hardened ferrule to slide along the inner conical seat of the body and grip the tube. Tightening the nut, ring deforms due to 24 degree cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak proof at high pressure and under vibration
 
 
 Before Tightening  After Tightening
 
 
  Sealing Points 1, & 2  
 
 
  Recommendation  
  Use Seamless tube as per Standard ST37.4 or DIN 1630 – 2391 for proper biting on tube. .  
 
   
      
 
Corporate Office : Gala No. 108 Shillay Ind. Estate 1st floor, Plot H8 Udyag Nagar S.V. Road Goregaon (W) Mumbai-62 Tel : +91-22-2876 86 93  Fax :+91-22-2877 16 57 
Email : superhydrotech@gmail.com