Mission

 
 
 
 

To be leader in providing Hydraulic Solution by understanding the needs of the customer and providing quality product / service at the right time and at right price

 

Twin Ferrule Fittings, Double Ferrule Fittitngs, Ferrule Fittitngs, 37 Degree Flare Fittings, Flare Fittings, Pipe Fittings, Stainless Steel Pipe Fittings, Socket Weld Fittings, Hydraulic Flanges, Hydraulic SAE Flanges, Split Flanges, SAE Flanges, Pipe Clamps, DIN 3015 Pipe Clamps, Valve, Ball Valve, Needle Valve, Flow Control Valve, Check Valve, Non Return Valve, Hose End Fittings, Quick Release Coupling, Superhydrotech  Engineers Pvt. Ltd.

Twin Ferrule Fittings

Twin Ferrule Fittings
   

   Twin Ferrule Fittings

                                                                                               

<
     
  S. H. Twin Ferrule Fittings consists of Body, Nut, Front Ferrule and Back Ferrule. Twin Ferrule Fittings are available for different pressure rating ranging from 140Bar to 690Bar  
 
 Type
 Double Ferrule Fittings (Front & Back Ferrule)
 Size
 2mm to 25mm 1/16”OD to 1 1/2”OD
 Pressure
 Ranging from 130Bar to 760Bar depending on type and size
 Material
 Steel, Stainless Steel, Brass (From extruded bar or forging)
 Surface
 Steel – Zinc Coated (A3C) or Phospatised, Trivalent Stainless Steel –  Electro polished, Nut Silver Plated to avoid galling Brass – Natural
 
  Theory of Operation  
  S. H . Twin Ferrule fittings are composed of four parts :-  
 
 
The S.H.HYDRAULICS tube fittings is a mechanism used both to seal and to grip tubing. The mechanical advantage and geometry of this kind of fittings produces a leak-tight assembly. To assemble, simply insert the tube into the complete assembly until the tube bottoms-out against the shoulder of the fitting body (1). The two ferrules are driven forward between the nut (4) and fittings body using the mechanical force created by rotating the nut clockwise. The back twin ferrule fittings (3) is driven against the tapered rear of the front ferrule (2) and the front ferrule is driven by force into the tapered mouth of the body. The rear twin ferrule fittings is swaged radialy inwards on the tube while lifting the front ferrule out to form a full-faced seal on the tapered surface of the body. The 1 1/4 turn of the nut from the hand tight position assures consistent drive of the sealing members. This ensures an effective seal against high pressure as well as ultra high vacuum conditions.
 
     
 
 
 
 
Corporate Office : Gala No. 108 Shillay Ind. Estate 1st floor, Plot H8 Udyag Nagar S.V. Road Goregaon (W) Mumbai-62 Tel : +91-22-2876 86 93   Fax :+91-22-2877 16 57 
Email : superhydrotech@gmail.com